Diameter; ±0.05mm 1 kg of product on a reel 200 mm diameter by 70 mm wide with a 54 mm bore Vacuum packed with Silica Gel desiccant pouch.
Transparent, super strong, and high flame retardant level (UL94-V2)
Require a complete enclosure to maintain the temperature.
Print temperature :230-260℃.
Note that Nylon absorbs moisture quickly so keeping it dry before/during printing is required.
To get satisfactory prints once the filament is out of the vacuum pack, it is to necessary to dry it in an oven at 60℃ ~70℃ for 6 hours.
If the spool is out in the open air for any length of time between prints it may need to be put back in an oven for 12~24 hours.
Once the filament is dry, it should extrude clean with no bubbles or popping sounds.